Friday, April 24, 2009

Steering Column mods

In for a penny and all that - the thought of replacing the standard GT6 steering column bushes (again) !!!!
Anyway going to use a complete Volvo steering column/ignition barrel so only problem is attaching it the the GT6 rack

So easy mod really - cut down the existing shaft

Chop a bit of the out sleave from where the clap is - which happens to have the same o/d as the Volvo steering knuckle - less a machine flat








Tig the 2 together having machine a groove in the shaft to make sure the weld really penetrates into the shaft











Tickle it round with the tig


Jobs a gooden - just need my mate to sort out machining a flat so as it inserts into the Volvo steering knuckle - job done


Wednesday, April 15, 2009

Lost the plot over the last 3 months and not really done anything with the car


Finally finished the 3' down pipe and the first section under the gearbox - less a bit of flap disc action too clean it up and get it blasted and coated




Started back on the rear end panelling and rear deck area - I really hate body work and have lost the will to live with it !!!


As you can see lots of fabrication required - will give a good solid base for the full cage







Starting to look at jigging up the roll cage - going to weld it in and mount to chassis



Not going to run a boot floor for easy access to tank etc - but will be looking at some under body areo mods so might even get a complete alloy flat plate to cover the entire underneath of the tub


Going for the single NASCAR type look wiper blade

Renault wiper motor tucks up nicely and gets rid of that piece of crap taking up space on the bulk head