Finally Got around to finishng the cage

Decided to make the bars down to the front turrets removable - looked at loads of routes through the bulk head

So heres what I came up with - some 4mm plate and a tube welded to the front horizontal hoop

Through the bulkhead

You can now wack the bulk head with a lump hammer and it donrt move an inch

Left and right side done

Starting to put some paint on

Not really had any time over the past 6 months - managed to squeeze a day in between Christmas and New Year

Need to seam seal the joints and one more coat of filler primer

Doors are the next job - need to cut inner door skin to fit the door bars