Friday, June 05, 2009

Cage continues

Front legs bent up - made sure that they fitted above the top of the door frame - so you dont twat your head every time you get in and out - not going to have a head lining either so a bit more room to play with



Although cage is well up in the roof - its quit easy to get the mig torch around 360 deg's




Now the interesting bit - triangulating it back across at floor level to the inner plate the will take a longitudinal tube from the top of the rear hoop - going to run a middle and top cross brace between the front legs of the main cage over the gearbox and at the roof lip - who needs sun visors?







Front main bar in at roof level - made sure its well up out of eye sight






Going to modiy the inner door skin as I need clearance for seats




Drivers door bar in - not posible to replicate the passenger side arrangement due to the pedals - bent up some 4mm plate and going to weld it to the front leg off the cage - and on top of the front body mount/outrigger



Ran a cross brace at the base of the rear hoop - just incase