



Servo unit fits like a glove - however will need to run a remote reservoir as I would need to chop the windscreen frame out!!





Chopped out the bulk head for the servo unit - most people seem to go for the pedal box arrangement - but I'm grafting in a complete Scooby STi brake servo unit
Also going over the top on the cage – gone from the original rear hoop idea into a fully welded seamless cage – mainly to strengthen the tub enough to get rid of a hideous amount of chassis flex – so first mounting in – nice bit of 6mm plate
Most people are taking weight out of there cars to improve the bhp/ton ratio – I’m going about it the other way and putting additional weight over the back axle to keep the thing on the ground – typically most GT6/Spit engine transplants seem to be pumping out around 160 – 180 bhp so 300 bhp & 285 lbs/ft torque should still deliver the goods

Been sorting out the relocation of the turbo unit - used some seemless 2' 1/2'' ID tube with a 5mm wall thickness so I could turn down and make a register to fit into the turbo housing .jpg)








Block:
5 Cylinder Volvo 2319cc 850 T5-R
Bore 81.0mm
Stroke 90.0mm
Head:
4 Valve per cylinder
DOHC
Compression Ratio 8.5:1
Camshafts:
Standard
Power band 2000 – 5200
Induction & engine management:
Multi-portfuel injection
850-R Turbo Charger
Remapped ECU by Celtic Tuning - see links
Exhaust:
3' Straight through system without Cat
Transmission:
5 speed Volvo 960(M90) gearbox with 3.61:1 Cosworth limited slip differential
Suspension:
Front – Top and bottom tubular wishbones, Ford Sierra uprights, hubs and discs, adjustable coil over shock absorbers
Rear – Top and bottom tubular wishbones, Ford XR4x4 driveshafts, hubs and discs, adjustable coil over shock absorbers
Brakes:
Front - 280mm Ventilated discs and Granada calipers
Rear – XR4x4 Discs and Granada calipers
Power Output:
285 bhp - 280 lb/ft torque
Block:
Triumph 6 cylinder Capacity 2263cc
Bore 79.5mm
Stroke 76.0mm
Head:
Flow bench developed head
37.75mm inlet 31.25mm exhaust valves
Compression Ratio 12.75:1
Camshaft:
Specially developed full race profile
Power band 5000 – 7800
Induction system:
Modified Lucas fuel injection
6-inch Ram pipes
Exhaust:
6 – 3 tubular steel manifold into 3 separate pipes and silencers
Transmission:
Lighten flywheel, AP competition clutch, 'J' type overdrive gearbox and 3.63:1 differential
Suspension:
Front – Standard configuration, Koni shock absorbers with 9’1/2’’ coil springs 800 lbs rating
Rear – Rotoflex couplings, Koni shock absorbers with Triumph Herald estate transverse spring
Brakes:
Front - Ventilated discs with 4 pot callipers
Rear – Discs
Power Output:
200 bhp (flywheel)