Sunday, June 08, 2008

Relocating the turbo

Been sorting out the relocation of the turbo unit - used some seemless 2' 1/2'' ID tube with a 5mm wall thickness so I could turn down and make a register to fit into the turbo housing







Then needed to step down from 2' 1/2'' to 2' and weld to the main exhaust rail




Not sure if I'm going to get it blasted and coated as its going to get kin hot




One size large outlet - going to buy in some performed stainless 3' tube and 'tig' up the exhaust - straight 3' all the way through into a transvers box of some sort








Sunday, June 01, 2008

Rad and Intercooler in place


Volvo rad in along with standard fan - didn't see any advantage in re inventing the wheel as my road car would sit in traffic all day long without over heating and puking its guts up - unlike the GT6







Same with the intercooler - one size large




Going to install a water spray jet - latent heat effect so will be the same as on a cold morning





Its a tight squeeze but it all fits - also big oil cooler in aswell


Tuesday, May 20, 2008

Random track photo's












Top left: Me at Goodwood Sprint 1988 - bottom left my mate Pete at Goodwood - top right me spinning at Lydden Hill









Above: Left gid line up Mallory 1990 - right my mate Pete's GT and bottom me at Snetterton 1991


















Above: Top left me at Snetterton 1994 - bottom left me at Brands Hatch - middle prep for Brands Hatch - right Hugh Davis at Goodwood Sprint 1988









Above: Left me at Snetterton 1994 - above right me at Brands Hatch 1991



2.3cc Fuel Injection - 1994 race engine - below on the trailer going home - You can just see the rear disc conversion!!










Being towed away after crash at Pembrey 1994 - only got three wheels???



Right in the pits at Snetterton 1994







TR 4 spinning at Snetterton 1994



Right 2500cc Spitfire






Eddie Wilkins 1300 Spit - won the Championship that year 1991


Practice line up - Mallory 1991




In the pits at Goodwood 1993




Nice arse!!!!





Pembrey race 1994 - still got 4 wheels!!!



No - I've only three wheels!!!




Quick 1500 left hooker




Right Rob's 2100 cc fuel injected GT - Mallory 1991 - trusty tow cars behind!!


Testday Goodwood late 1992





Thursday, May 15, 2008

Odds and time consuming sods

Uploaded some photo's on stuff your never really going too see - machined up the steering arm extensions



Dusting off my machining skills on my mate Steve's lathe











Good thing with the Sierra track rod ends is they have an offset - so even though I've moved the steering rack forward to clear the front pulley - due to the offset and the longer arm on the upright - the geometry of the steering arm is better than the original - must add this was something I was slated for originally - quote - 'you can't move the steering rack' - b&*^%$ks - I can and I have










Also the exhaust manifold - got a mate who has access to a water jet cutter - so got the exhaust and the turbo inlet flanges cut out - 2' 3/4'' inlet into the turbo and 3' out into the system










Also had to gas weld the flanges - far too much carbon deposits in the steel for mig






Just need to cut a 3' hole in the side weld the flange on and bolt the R turbo on

Tuesday, April 15, 2008

Finally got some time to upload some photo's after about 6 months

Been in hospital, moved house and changed jobs

Having bought in a Locost/Westfield front and rear suspension setup complete with bushes etc - found it had stange bolt sizes - 31/64' - fine if you can find an 31/64' bolt?

So decided to remake all 16 bushes using M12 - which means some nice socket cap bolts as well. Bit tedious but well worth it - could of gone for the easy option and used 1/2' UNF bolt but decided to go away from UNF bolts where posible


Some nice big discs from a 2.9 Scorpio

Loads of options on calipers and being Ford cheap as chips - the brakes on the Granada/Mondeo are pretty good with the ability to stop a car twice the weight of the GT6.


So decided to give the Granda caliper a go as they are one massive caliper with a pad size approx 2 1/4 times the stock GT6 pads





Also nice to get away from that hideous vertical link and trunnion piece of crap - long term plan will be to replace the stock Seirra upright for an all alloy unit - but one step at a time - get it running first



Gone for 500 lbs front springs with a modified top mount - 300 lbs rears

Two jobs left to finish - need to extend the steering rack and convert to metric thread - note the additional width in wheel track as steering rack is approximatley central. Also sort out the brake lines.














Started a trial fit of the rear end aswell - using XR 4x4 driveshafts and LSD again Granada rear discs and calipers


Tuesday, November 27, 2007

Still nothing happening

Apart from the wife spending all my project money on Christmas
So I've posted some photos of the body work mods - some justice I suppose as she knows nothing about the costs involved

New floor pans - note 1' 1/2'' lower than normal - put in by my Mark @ STS