Tuesday, May 20, 2008

Random track photo's












Top left: Me at Goodwood Sprint 1988 - bottom left my mate Pete at Goodwood - top right me spinning at Lydden Hill









Above: Left gid line up Mallory 1990 - right my mate Pete's GT and bottom me at Snetterton 1991


















Above: Top left me at Snetterton 1994 - bottom left me at Brands Hatch - middle prep for Brands Hatch - right Hugh Davis at Goodwood Sprint 1988









Above: Left me at Snetterton 1994 - above right me at Brands Hatch 1991



2.3cc Fuel Injection - 1994 race engine - below on the trailer going home - You can just see the rear disc conversion!!










Being towed away after crash at Pembrey 1994 - only got three wheels???



Right in the pits at Snetterton 1994







TR 4 spinning at Snetterton 1994



Right 2500cc Spitfire






Eddie Wilkins 1300 Spit - won the Championship that year 1991


Practice line up - Mallory 1991




In the pits at Goodwood 1993




Nice arse!!!!





Pembrey race 1994 - still got 4 wheels!!!



No - I've only three wheels!!!




Quick 1500 left hooker




Right Rob's 2100 cc fuel injected GT - Mallory 1991 - trusty tow cars behind!!


Testday Goodwood late 1992





Thursday, May 15, 2008

Odds and time consuming sods

Uploaded some photo's on stuff your never really going too see - machined up the steering arm extensions



Dusting off my machining skills on my mate Steve's lathe











Good thing with the Sierra track rod ends is they have an offset - so even though I've moved the steering rack forward to clear the front pulley - due to the offset and the longer arm on the upright - the geometry of the steering arm is better than the original - must add this was something I was slated for originally - quote - 'you can't move the steering rack' - b&*^%$ks - I can and I have










Also the exhaust manifold - got a mate who has access to a water jet cutter - so got the exhaust and the turbo inlet flanges cut out - 2' 3/4'' inlet into the turbo and 3' out into the system










Also had to gas weld the flanges - far too much carbon deposits in the steel for mig






Just need to cut a 3' hole in the side weld the flange on and bolt the R turbo on

Tuesday, April 15, 2008

Finally got some time to upload some photo's after about 6 months

Been in hospital, moved house and changed jobs

Having bought in a Locost/Westfield front and rear suspension setup complete with bushes etc - found it had stange bolt sizes - 31/64' - fine if you can find an 31/64' bolt?

So decided to remake all 16 bushes using M12 - which means some nice socket cap bolts as well. Bit tedious but well worth it - could of gone for the easy option and used 1/2' UNF bolt but decided to go away from UNF bolts where posible


Some nice big discs from a 2.9 Scorpio

Loads of options on calipers and being Ford cheap as chips - the brakes on the Granada/Mondeo are pretty good with the ability to stop a car twice the weight of the GT6.


So decided to give the Granda caliper a go as they are one massive caliper with a pad size approx 2 1/4 times the stock GT6 pads





Also nice to get away from that hideous vertical link and trunnion piece of crap - long term plan will be to replace the stock Seirra upright for an all alloy unit - but one step at a time - get it running first



Gone for 500 lbs front springs with a modified top mount - 300 lbs rears

Two jobs left to finish - need to extend the steering rack and convert to metric thread - note the additional width in wheel track as steering rack is approximatley central. Also sort out the brake lines.














Started a trial fit of the rear end aswell - using XR 4x4 driveshafts and LSD again Granada rear discs and calipers


Tuesday, November 27, 2007

Still nothing happening

Apart from the wife spending all my project money on Christmas
So I've posted some photos of the body work mods - some justice I suppose as she knows nothing about the costs involved

New floor pans - note 1' 1/2'' lower than normal - put in by my Mark @ STS


Saturday, October 20, 2007

Bling from the blasters

Got some stuff back from the blasters today - one modified chassis






Fabricated engine & diff mounts and also gearbox linkage
Front and rear upper suspension arms

Front lower suspension arms










Sunday, October 07, 2007

A little bit more progess

Just rebuilt the rear hubs - new bearings etc - funny how these make the standard GT6 vertical links and bearings look like something you would put on a Scalextric's model

Saturday, September 29, 2007

Nothing been happening for a month or so!

Since the chassis was sent to the blasters not been upto much apart from working on the cage fabrication




Using 48mm o/d seamless tube 3.5mm thick - going to welded it into the shell





Rear hoop and 1/2 the front cage done

Monday, September 17, 2007

Nothing been happening for about 2 months on my car - moving house and all that!!

So thought I'd upload some pictures of my mates V8 GT6 mk 11 - making more progress than me!!!!

Monday, August 20, 2007

Body off and chassis ready for blasting

Got some time over the weekend to finalise the rear coil over mountings and remove the body tub

I was quite surprised how flexible the existing shock mounts were at the rear on the standard chassis - I know I've gone a little OTT on the box section - however the rear end won't move at all now + with close to 350 bhp/t going out through the rear wheels - things need alittle uprating


Also took the opportunity to drill holes in all the new box section so I can spray wax oil everywhere